E-PAPER · WAREHOUSE LABEL · LDSW

Warehouse labels
stock figures that reach the shelf

E-paper warehouse labels replace paper material cards and handwritten bin tags. Record an inbound, issue, return or stocktake in the system and the screen at that bin updates straight away — pushed over the LDSW low-duty-cycle wireless network through the gateway, with no wiring and no hand-writing every card.

  • Multiple sizes2.13″–7.5″ standard · custom available
  • Auto stock updateone transaction · screen follows
  • 5-year battery lifeCoin cell · normal refresh rate

From numbers on a card to numbers in the system

The problem with paper cards is not only that they are hard to change: issues have to be looked up in a book, stock can only be confirmed by counting on site, and item codes often stop matching their bin. A warehouse label turns stock into a ledger.

Stock is the ledger

Every inbound, issue, return and stocktake is recorded as a transaction, and stock is derived from those transactions — not from whatever was last written on a card.

The screen keeps up

Record a movement and the screen at that bin refreshes, so whoever walks up sees the current figure without going back to a terminal.

Find stock without paperwork

Say a part name or item code and the system locates it, then lights the screen at that bin — less time checking bins one by one.

Find an item: the bin lights up, buzzes, and follows the backend

On the left are the bins; on the right is the platform console. First set the screen size and layout in the backend, then search for an item and let the bin light and buzz, and finally issue stock so the figure on screen updates itself — exactly what happens on site.

Bin labels Idle

No item located yet

Light and buzzer are a single command (cmd 11 on, cmd 12 off); when an item sits in several bins, all those screens light together.

1. Screen size and layout

The same item can run on a different screen size and a different layout; 2.13″–7.5″ as standard, other sizes and layouts made to order.

Screen size
Layout

2. Find the item

Search by name, code or bin — the voice assistant uses the same lookup.

3. Light and buzz

One click lights the bin screen and sounds the buzzer; it switches off after 60 seconds so nobody has to come back and turn it off.

4. Backend and label in sync

Record an issue in the backend and the stock figure on that bin screen refreshes at the same time — nobody walks over to change it.

Activity

    Four everyday movements plus reversal, one system

    Stock management behind these labels is an append-only ledger: inbound, issue, return and stocktake are each recorded as a transaction, and a mistake is corrected by a reversal entry that cancels it out while the original stays on record.

    Inbound

    Goods received from purchasing or production increase stock and record a transaction; the on-bin figure grows.

    Issue

    Materials issued to the line reduce stock; if there is not enough, the system stops it instead of going negative.

    Return

    Surplus materials go back into stock with a record that matches the original issue.

    Stocktake

    Enter the counted figure and the system adjusts by the difference, keeping the stocktake on record.

    Mistakes can be reversed

    An entry made in error is reversed by a matching counter-entry; the original stays on record so the books still balance.

    Safety stock tracking

    Each item carries a safety stock level, so items running low show up before a stocktake reveals them.

    Mark high-value items

    Items can be flagged with a control level (for example high value) so they stand apart in the register.

    Books and shelves agree

    Register, ledger and screen share one source, so a stocktake difference can be traced to the transaction that caused it.

    Everything built around the figures on the bin

    All of the following is available on our in-house LDSW IoT platform once an account is opened.

    Item register and templates

    Name, item code, specification, bin, unit and safety stock live in one place; the layout on the bin screen comes from a screen template shared by similar items.

    One item, many bins

    A single item stored in several bins can be bound to several screens; change the stock once and every related bin screen updates together.

    Scheduled refresh

    Screen updates can be scheduled (for example once per shift) and run automatically — nobody has to sit and press a button.

    Voice lookup and pick-to-light

    Say an item name, code or bin and the system locates it and lights that bin's screen — find stock while you walk.

    Kingdee KIS integration

    Built-in synchronisation with Kingdee KIS: document events make screens change quickly, while periodic stock snapshots keep the figures accurate.

    Same console as price tags

    Warehouse labels share gateways and platform with electronic shelf labels, so store and warehouse are managed in one console.

    One battery for five years, warehouses across different areas managed by one person

    A site often runs several warehouses in different areas, and managing each one separately ties people up. A five-year battery and one console let a single person keep them all in view.

    5yrs

    Up to 5 years on a battery

    E-paper keeps its image with no power once refreshed, so a label only draws current when stock changes — a coin cell keeps a bin label running for around five years at a normal stocktake and issue frequency.

    • Estimated at a normal update frequency
    • Essentially no battery changes within 5 years
    • No more swapping cells bin by bin

    Managed remotely, nobody on site

    Inbound, issue, layout and template changes are all handled in the backend and pushed to the bin through the gateway — nobody has to walk the aisles.

    Many warehouses, one console

    Several warehouses on site or several zones across floors are all grouped by area in one console: push to every zone at once, or pick just one.

    Status by zone at a glance

    Online status, zone and bin, and the result of the last push are visible in the backend — a screen that missed an update is easy to spot.

    One gateway covers a large area

    LDSW gateways network by low-duty-cycle polling: about a 50 m radius where racks obstruct the signal, up to 200 m in open space; larger warehouses add a few more by floor area.

    No battery changes for 5 years

    One coin cell covers a full five-year cycle — no swapping, no spare parts and no labour for the life of the label.

    Battery note: the five-year figure assumes a coin cell, a normal stock update frequency and room temperature. Frequent refreshes, larger screens or extreme temperatures shorten it; we give a specific estimate during selection.

    Multiple sizes available, custom sizes supported

    Bin tags, rack cards and tool-cabinet labels carry different amounts of information. These are our standard sizes; custom sizes are available per project.

    2.13″Small · code + qty
    2.9″Medium · standard bins
    4.2″Large · more content
    7.5″XL · racks / tool cabinets
    Sizes2.13″ / 2.9″ / 4.2″ / 7.5″ standard, with custom sizes available per project
    DisplayElectronic ink, retained without power after refresh; static content draws no power
    ConnectivityLDSW low-duty-cycle smart wireless, networked and pushed through a gateway
    Screen contentItem name, code, specification, bin, stock quantity, pending quantity and unit, laid out by template
    PowerCoin-cell battery; power is used mainly when refreshing
    MountingAdhesive, shelf clip or rail — attach to the bin edge, no wiring
    IntegrationKingdee KIS documents and stock; shares the platform with electronic shelf labels
    Typical useLine-side stores, finished goods, raw material stores, tool cribs, spare parts

    Note: battery life varies with refresh frequency, screen size and ambient temperature; confirm during selection. Custom sizes and mounts are available.

    Every figure on the shelf can be handled by it

    01

    Line-side store

    Frequent issues and returns next to the line. Workers see how much is left as they walk up, reducing trips and over-issues.

    • Issue deducts, screen follows
    • Pending quantity shown separately
    • Safety stock warnings
    02

    Finished goods & raw materials

    Many bins and many codes make paper labels easy to misplace. Code and bin are printed on the screen; moving a bin is one change in the backend.

    • Code and bin at a glance
    • No reprinting when moving bins
    • One code in several bins
    03

    Tool cribs & spares

    Tools and spares are few in number and high in value — mark a control level and track them individually, with issues on record.

    • High-value items flagged
    • Issues and returns recorded
    • Stocktake differences traceable
    04

    Store back rooms

    Price tags out front and warehouse labels in the back, on the same gateways and console, with bins and stock maintained in one place.

    • Front of house and back room together
    • One backend for store and warehouse
    • Unified device and group management

    One network cable to the gateway, labels stick on and work

    No wiring to the racks, and no per-label Wi-Fi setup, charging or mains power. A whole warehouse needs just one network cable at the gateway — every label is then managed from the backend.

    1

    Plug in the gateway

    One network cable and power for the gateway. A single gateway covers a large area — about a 50 m radius where racks obstruct the signal, up to 200 m in open space; larger warehouses add a few more.

    2

    Stick on the labels

    Labels come with adhesive backs or shelf clips — attach to the bin edge, rack face or rail. No wiring, no charging.

    3

    Bind in the backend

    Map each label to its item register entry. After that, stock movements and layout changes happen in the backend — the warehouse does nothing.

    No racking changes

    No wiring, no cutting, no structural changes — labels go on while the warehouse keeps working.

    Roll out area by area

    Start with one zone or one line, prove it, then extend across the warehouse without stopping production.

    Moving bins is easy

    Labels can be moved to another bin and re-bound in the backend — no reprinting, no factory return.

    Start with a pilot

    Try one zone or line first to prove the stock flow and pick-to-light, with little upfront risk.

    Questions asked before choosing

    Will the figures on screen conflict with our ERP?

    Stock is kept in the platform ledger and can be synchronised from external systems — we have an integration with Kingdee KIS, where document events update quickly and stock snapshots correct drift. Other ERP systems are assessed based on whether they offer an open API.

    What if someone records the wrong movement?

    Every movement is on record; a mistake is reversed with a matching counter-entry and the original stays, so the books remain traceable.

    What if one item sits in several bins?

    That works: one item can be bound to several screens in different bins, and changing stock once updates every related bin screen.

    Can we use it without internet access?

    Yes. The platform can be deployed privately on your own server or intranet; gateways only need access to your corporate network, and data stays on site.

    Is this the same system as the electronic shelf labels?

    Yes. Warehouse labels share the LDSW gateways and platform console with price tags, so store and warehouse can be planned and managed together.

    Send us your bin count and item codes

    Tell us your warehouse scale, number of bins and types of materials, and we will recommend a label mix, gateway count and deployment approach.

    Already on the LDSW platform?

    Platform customers can sign in to manage item registers, bin labels and stock movements from the Warehouse Label workspace.

    Admin Console

    To open an account or deploy privately, please contact us by email.